ANT2500; In NQ size 2.500 meters and HQ size 1.750 meters can drill down. This drilling machine is designed and manufactured specif ically for your mine research with its Multifunction use. Manufactured with world standard equipment and materials, all parts and components of our machine can be easily found all over the world.
ANT2500; we aim to provide the highest hydraulic and mechanically full-time performance, thanks to the high quality products that are also used and selected in our production. Aiming to provide you convenience and power in the most diff icult land conditions, our machine is a multi-function drilling machine manufactured for you with its design and product quality.
ANT2500; manufactured according to all occupational safetycriteria, our machine provides all HSE standards under land conditions and during operation. Our company supportsthe zero accidental policy with both our personal trainingsand our occupational safety equipment on the machine.
ANT2500; has all the analogue and digital indicators on themachine. Our panel provides the opportunity to monitorall data at the same time. It is designed for easy andsimple use f rom diff icult land onditions. This panel is also supported with remote monitoring and usage module and can be managed from thousands of kilometersby the moving panel and remote management module.
Hydraulic telescopic mast. •
Main crane and wireline crane. •
200 liter fuel tank. •
Triplex mud pump. •
Hydraulic telescopic mast. •
Convenient control panel. •
Optional diesel engine. •
Hydraulic jacks. •
| UNIT | BRAND | FLOW | PRESSURE |
|---|---|---|---|
| MAIN HYDRAILIC PUMP Variable Displacement Axial PumpLoad Sensing |
Rexroth/Kawasaki | 160cc | 350bar |
| Second Hydraulic (Piston) Pump | Rexroth/Kawasaki | 45cc | 350bar |
| Thirt Hydraulic Pump (Piston) Pump | Rexroth/Kawasaki | 28cc | 280bar |
| Forth Hydraulic (Gear) Pump | Casappa/Hema | 19cc | 200bar |
| Fifth Pump (Gear) Pump | Casappa/Hema | 8cc | 200bar |
| Wireline Hydromotor | Brevini/Danfoss | 400cc | - |
| Mud Pump Hydromotor | Danfoss/Eaton | 100cc | - |
| Main Winch Hydromotor | Rexroth | 80cc | - |
| Hydraulic Controller Units | Danfoss/Buchern | - | - |
| Control Panel Hydraulic Components | Sun/Oleoweb | - | - |
| Hydraulic Tank Capacity | 400lt | - | - |
| Cooler | Akg | - | DOUBLE COOLING |
| Filters | RETURN , SUCTION , PRESSURE AND ROTARY DRILLING CAPACITIES UNIT. |
- | - |
| ENGINE MODULE | Cummins/Ford/Volvo/Mercedes-Benz |
|---|---|
| Maximum Power | 360 Hp - 450 Hp @2100rpm |
| Full Tank Capacity | 200 Lt |
| Emissions Certification | Tier-6 Certification |
| Tork Values | 1700 Nm @1300rpm |
| Control Unit | Electronic Control (ECM) |
| HYDROMOTOR | 160cc |
|---|---|
| Chuck Inner Diameter | 190mm |
| Jaw Quantity | 7 Pieces |
| Axial Holding Capacity | 184,700 N |
| Jaw Type | Hydraulic Compression Spring Opening |
| Mechanical Transmission | Funk 4 Gear |
| Main Gear Ratio | 2:1 |
| WIRELINE ROD NAME | OUTER DIMENSIONS | DRY WELL | WET WELL |
|---|---|---|---|
| BQ | 55,60mm | 2400mm | 3000mm |
| NQ | 69,90mm | 1800mm | 2500mm |
| HQ | 88,90mm | 1250mm | 1750mm |
| PQ | 114,90mm | 600mm | 850mm |
| DRILLING ENGINE | Between 450 - Horizontal 900 Vertical |
|---|---|
| Feed Stroke | 350cm |
| Feed Pull | 18.000kg |
| Feed Thrust | 24.000kg |
| Mast Feature | Telescopic Folding Mast 6 mt Rod Pul Independent 2 Hydraulic Piston Hydraulically Side Moving Rotation Unit Main Winch on the Mast Emergency Safety Wire Ropes |
| DRILLING ENGINE | Between 450 - Horizontal 900 Vertical |
|---|---|
| Main Winch | BRADEN Fixed Speed Hydraulic Powered Motor 9.000 Kg. Pull Up Capacity 15m/min Pull Up Speed 18mm Dia Wire Rope |
| Wireline Winch | 37 kN Free Drum Force 8,9 kN Full Drum Force 130m/min Free Drum Speed 550m/min Full Drum Speed 6 mm DIA , 1.600m Steel Rope |
| Crawler | STRICKLAND SRL 12 TON |
| GEAR RATIOS | RPM | TORQUE |
|---|---|---|
| 6,27:1 | 160rpm-260rpm | 9.582 Nm-6.007 Nm |
| 3,12:1 | 320rpm-522rpm | 4.941 Nm-2.983 Nm |
| 1,75:1 | 571rpm-930rpm | 2.716 Nm-1.678 Nm |
| 1,00:1 | 1.000rpm-1.630rpm | 1.564 Nm-722 Nm |
